As a high-end cutting and carving equipment, CNC cutting machines,This is mainly because it can be used for milling and carving cabinet doors and wooden doors; It can also be used for punching vertical holes, slotting, and cutting materials in the production of panel furniture. It is an essential equipment for batch, standardized, mechanized, and professional production of furniture.

However, machines, like humans, require regular maintenance and there are many things to pay attention to. Without further ado, today we will take a look at the precautions for using CNC cutting machines in recent weather conditions!

First, due to recent heavy rainfall, CNC cutting machines should not be placed in outdoor environments as they should not be exposed to prolonged moisture.

Second, due to the recent rise in temperature, it is essential to do a good job in cooling the CNC cutting machine. It is important to ensure timely cleanliness of the cooling water and smooth operation of the water pump. Water shortage in the water-cooled spindle motor (water pump) must not occur, and it is recommended to replace the cooling water regularly (3 hours is recommended) during operation.

Third, in hot weather, the CNC cutting machine should not be operated for more than 10 hours.

Fourth : Do not choose to debug the CNC cutting machine in cloudy, rainy, thunderstorm or other weather conditions.

Fifth : Recently, it has been hot and during peak electricity usage, so it is necessary to prepare a voltage regulator regularly. If the voltage is unstable, it can easily lead to machine alarms.

Sixth: If the CNC cutting machine emits smoke or odor during operation, it should be stopped immediately and the manufacturer or after-sales personnel should be contacted.

Seventh: The personnel operating the CNC cutting machine must maintain a high level of concentration and avoid being distracted during operation, otherwise accidents are very likely to occur.

Eighth point: When the operator is unable to operate due to something, the equipment must be powered off, and the equipment must be stopped when people are walking. It is absolutely prohibited for the CNC cutting machine to run without supervision.